Filter
Top Products
Transmitter display featuresFigure 8-1:
A
B
C
D
E
F
G
H
A. Status LED
B. Display (LCD panel)
C. Process variable
D. Scroll optical switch
E. Optical switch indicator: turns red when either Scroll or Select is activated
F. Select optical switch
G. Unit of measure for process variable
H. Current value of process variable
8.2.2 View process variables using the Chinese-language
display
View the desired process variable(s).
By default the Chinese-language display shows the mass flow rate, mass total, volume flow
rate, volume total, temperature, density, and drive gain. The display reports the name of
the process variable (for example, Density for density), the current value of that process
variable, and the associated unit of measure (for example, g/cm3).
If desired, you can configure the display to show other process variables, such as totalizers
and inventories.
If Auto Scroll is enabled, the display cycles through the configured display variables, showing
each display variable for a user-specified number of seconds.
Transmitter operation
Configuration and Use Manual 119