Filter
Top Products
Procedure
• To change the value:
1. Activate Select until the digit you want to change is active (flashing).
Select moves the cursor one position to the left. From the leftmost position, Select
moves the cursor to the rightmost digit.
2. Activate Up/Down to change the value of the active digit.
3. Repeat until all digits are set as desired.
• To change the sign of the value:
- If the current value is negative, activate Select until the minus sign is flashing,
then activate Up/Down until the space is blank.
- If the current value is positive and there is a blank space at the left of the value,
activate Select until the cursor is flashing under the blank space, then activate Up/
Down until the minus sign appears.
- If the current value is positive and there is no blank space at the left of the value,
activate Select until the cursor is flashing under the leftmost digit, then activate
Up/Down until the minus sign appears.
• To move the decimal point:
1. Activate Select until the digit you want to change to the decimal location is active
(flashing).
Select moves the cursor one position to the left. From the leftmost position, Select
moves the cursor to the rightmost digit.
2. Activate Up/Down until the decimal point displays.
3. Activate Select to insert the decimal point at the current location.
• To save the displayed value to transmitter memory, activate Down and Select
simultaneously and hold until the display changes.
- If the displayed value is the same as the value in transmitter memory, you will be
returned to the previous screen.
- If the displayed value is not the same as the value in transmitter memory, Save?
shows on the display. Activate Select to save the new value.
• To exit the menu without saving the displayed value to transmitter memory,
activate Down and Select simultaneously and hold until the display changes.
- If the displayed value is the same as the value in transmitter memory, you will be
returned to the previous screen.
- If the displayed value is not the same as the value in transmitter memory, Save?
shows on the display. Activate Up to exit without saving the changed value.
Enter a floating-point value using exponential notation
Exponential notation is used to enter values that are larger than 99999999 or smaller than
−9999999.
Using the Chinese-language display
244 Micro Motion
®
Model 1700 Transmitters with Analog Outputs