Filter
Top Products
4—Setting Up and Basic Operations
Roland VS-2480 Owner’s Manual www.rolandus.com 71
8.
LOOP indicator
—shows when looping is turned on.
9.
AUTOMIX indicator
—shows when Automix is turned on.
10.
REMAIN
—shows how much disk space you have left. (You can set the unit of
measurement with the REMAIN DISPLAY TYPE parameter in the UTILITY menu.)
11.
SCENE
—shows the number and name of the current scene.
PAN/AUX SEND 1-8 Knob Strip
The VS-2480’s PAN/AUX Send 1-8 knobs can perform a variety of functions, as
described on Page 139. This strip shows their current settings. At the left of the strip, the
currently selected channel group and channel are shown. To the right of the strip are
input clipping indicators that show when a channel’s input signal level is too loud.
Meters Strip
In certain display modes—see “Selecting Info Displays Manually” below—the meters
strip shows the set of meters currently selected on the Home screen.
Bottom Pane
The contents of the Info Display’s bottom pane changes from screen to screen.
Controlling What’s On the Info Display
As you navigate the VS-2480’s LCD display, the Info Display automatically switches
between various screens. You can manually switch to a few key screens, and you can
lock the display so that it doesn’t change as you move around on the VS-2480.
Selecting Info Displays Manually
You can access several key screens from the VS-2480’s Home screen.
1. Press HOME/DISPLAY.
2. Press PAGE until “ID PL” appears above the F1 button.
Currently selected channel group
Clipping indicators
PAN/AUX SEND 1-8 knob settings
Currently selected meters
Whenever the meters
strip is visible, meters
for the MONITOR and
MASTER busses
appear at its right.
VS2480OMUS.book 71 ページ ２００６年２月７日 火曜日 午後４時１６分