Roland VS-2480 Stereo Equalizer User Manual


 
Roland VS-2480 Owner’s Manual www.rolandus.com 177
13—Operating the Hard Disk Recorder
This chapter discusses the mechanics of using the VS-2480’s hard disk recorder—
basically, it’s all about recording and playing back a project. We’ll describe the
recorder’s set of helpful tools for navigating a project and for playing it back in a variety
of ways.
The Transport Buttons
The Main Transport Buttons
The most basic tools you have for recording and playing a project—and running the
hard disk recorder—are the transport buttons.
Special Transport Buttons
In addition to the main transport buttons, you can jump to the:
the beginning, or “top,” of the project’s audio
—by holding down SHIFT
and pressing PREVIEW TO•PROJECT TOP.
the end of the project’s recorded audio
—by holding down SHIFT and
pressing PREVIEW TO•PROJECT END.
If you’re not clear on what the hard disk recorder is and what it does, see “The Hard
Disk Recorder” on Page 55. To learn the fundamentals of how it records and plays back
audio—and how its built-in hard disk works—see Chapter 6, starting on Page 85.
You can reverse any recording action using the VS-2480’s Undo and Redo features,
described on Page 72.
Press: To:
PLAY begin playback from the timeline’s current position in the project.
STOP halt playback at the timeline’s current position.
ZERO return to Time 00h00m00s00f00, the very beginning of the project.
REC begin recording any armed tracks, as described on Page 179.
The buttons perform other tasks when SHIFT is held down. STORE is described on
Page 43, SHUT/EJECT and RESTART on Page 80, and AUTOMIX REC in Chapter 26.
AUTOMIX RECRESTARTSTORE
ZERO STOP PLAY REC
SHUT / EJECT
SHIFT
+
PROJECT TOP
PROJECT END
SHIFT
+
VS2480OMUS.book 177 ページ 2006年2月7日 火曜日 午後4時16分