Filter
Top Products
25—Surround
322 www.rolandus.com Roland VS-2480 Owner’s Manual
Certain parameter values change when you turn on Surround mode.
Positioning a Signal in the Surround Field
Each input, track and FX return channel has its own Surround controls that let you
place its signal at the desired location within the three-dimensional Surround field. You
can position a channel’s signal from its CH EDIT VIEW page, or from its dedicated CH
EDIT SURROUND screen that presents a large graphic representation of the signal’s
Surround position.
1. Press the FADER button that selects the group of channels containing the one
whose Surround position you want to set.
2. Press the desired channel’s CH EDIT button.
At the bottom of the CH EDIT VIEW screen, you see that Surround parameters
have replaced the Aux bus send controls for the Aux busses used by the selected
Surround format.
These parameters are the same as those found on the channel’s CH EDIT
SURROUND screen—they’re available here to provide a quick way to adjust a
channel’s Surround position as you work with its other CH EDIT parameters. We’ll
describe how the Surround parameters work in our discussion of the CH EDIT
SURROUND screen.
3. If “Surrnd” isn’t visible above F2, press PAGE until it is.
4. Press F2 (Surrnd) to view the CH EDIT SURROUND screen.
Parameter type: What Happens:
Input and track channel CH
EDIT parameters
• ChLink is turned off for any linked channels.
• Surround placement controls replace the Aux bus send
controls for any Aux busses used by the selected
Surround format.
FX return channel CH EDIT
parameters
• The ASSIGN parameter is turned off for any Aux
busses used by the selected Surround format.
• Surround placement controls replace the Aux bus send
controls for any Aux busses used by the selected
Surround format.
MASTER EDIT parameters • The level controls of Aux busses used by the selected
Surround format become Surround speaker master
level controls.
• If any Aux busses used by the selected Surround
format are linked, they become unlinked.
Input and track channels FX return channels
3+2+1 Surround position parameters
VS2480OMUS.book 322 ページ ２００６年２月７日 火曜日 午後４時１６分