Filter
Top Products
2—Getting Around
34 www.rolandus.com Roland VS-2480 Owner’s Manual
2—CH EDIT/SELECT/PHRASE SEQ STATUS/AUTOMIX STATUS
Buttons 1-16
When working with input, track and FX (“effect”) return channels, press this button to
view a channel’s CH EDIT settings—the button lights to show that the input, track or
FX return channel is selected. When working in Phrase Sequence or Automix modes,
the color of each of these buttons shows the current status of its sequence or Automix
track, respectively. See “3—PHRASE SEQ/AUTOMIX Key” below.
3—PHRASE SEQ/AUTOMIX Key
The PHRASE SEQ/AUTOMIX key explains the meaning of CH EDIT/PHRASE SEQ
STATUS/AUTOMIX STATUS button colors when working in Phrase Sequence or
Automix modes.
4—TRACK STATUS/PHRASE PAD
Buttons 1-16, 17-24, AUX MSTR 1-8, FX RTN 1-8
When working with track channels, press this button to set each track channel’s
status—the current status of the button is shown by its color (See ““5—TRACK STATUS
Key”” below). In Phrase Pad mode, each button acts as a pad you can strike to play a
phrase. See “Playing the Pads in Phrase Pad Mode” on Page 275. These buttons are also
used when selecting destination tracks during editing.
5—TRACK STATUS Key
The TRACK STATUS key explains the meaning of TRACK STATUS/PHRASE PAD
colors so you can tell if a track channel is set to record a track, play a track, do nothing
or play a phrase.
6—Channel Strip Faders
Use each channel strip fader to make adjustments to its channel’s output level. When
using the channel strips as a MIDI control surface—see Page 300—use the faders to
transmit MIDI Control Change messages.
7—AUX SEND•PRM EDIT Button
The color of the AUX SEND•PRM EDIT button shows what the PAN/AUX SEND 1-8
knobs (Page 33) are set up to do. Press the AUX SEND•PRM EDIT button to change its
setting. When the button is:
•
Unlit
—Each PAN/AUX SEND 1-8 knob controls the PAN setting of its channel.
•
Red
—Each PAN/AUX SEND 1-8 knob adjusts the value of the setting printed
beneath it for the currently selected channel.
•
Green
—Each PAN/AUX SEND 1-8 knob controls the send level from its channel to
the currently selected Aux bus. See “The KNOB/FDR ASSIGN•AUX SEND 1-8
Button” on Page 140 to learn how to set the AUX SEND•PRM EDIT button to green.
You can use the faders to control a variety of settings. See “To Set What the KNOB/
FADER ASSIGN Feature Controls” on Page 140.
An AUX SEND•PRM EDIT button color key is printed above and below the button.
VS2480OMUS.book 34 ページ ２００６年２月７日 火曜日 午後４時１６分