28—UTILITY Menu Parameters
Roland VS-2480 Owner’s Manual www.rolandus.com 365
PRM KNOB AUTODisp
When the PAN-AUX SEND 1-8 knobs are controlling the dynamics and EQ parameters
of a selected channel (Page 140), the VS-2480 can automatically jump to a screen that
displays those values when you turn one of the knobs. Set PRM KNOB AUTODisp to:
•
Off
—so that turning a PAN/AUX SEND 1-8 knob to adjust a channel’s dynamics or
EQ doesn’t cause the display to change.
•
CH VIEW
—so that turning a PAN/AUX SEND 1-8 knob to set a channel’s dynamics
or EQ causes the display to jump to the channel’s corresponding CH EDIT DYN
screen (Page 157) or EQ screen (Page 162).
AUX KNOB AUTO Disp
When you turn a PAN-AUX SEND 1-8 knob to set an Aux send level (Page 141), you can
set the display to automatically jump to a screen that displays Aux send values. Set
AUX KNOB AUTODisp to:
•
Off
—so that turning a PAN/AUX SEND 1-8 knob to adjust a channel’s Aux send
doesn’t cause the display to change.
•
CH VIEW
—so that turning a PAN/AUX SEND 1-8 knob to set a channel’s Aux send
causes the VS-2480 to display the channel’s CH EDIT VIEW screen (Page 150).
OPERATION DISPLAY
DATE/REMAIN Sw
You can replace the clock in the upper right-hand corner of the VS-2480’s LCD display
with a readout of how much free space remains on the currently selected drive. When
you set DATE/REMAIN Sw to:
•
Date
—the VS-2480’s calendar/clock is displayed.
•
Remain
—the amount of free space left on the current drive is shown.
REMAIN DISPLAY TYPE
When the display is showing the remaining space on the currently selected drive—see
DATE/REMAIN Sw above— REMAIN DISPLAY TYPE sets the manner in which that
information’s presented:
•
Time
—shows the remaining recording time based on the current sample rate and
recording mode.
•
CapaMB
—shows the remaining free space in megabytes (MB).
•
Capa%
—shows the amount of free space remaining as a percentage of the current
drive.
•
Event
—shows the remaining number of free project events.
VS2480OMUS.book 365 ページ 2006年2月7日 火曜日 午後4時16分