Filter
Top Products
2—Getting Around
Roland VS-2480 Owner’s Manual www.rolandus.com 35
8—PHRASE PAD PLAY•PHRASE SEQ Button
This button activates and de-activates the playing of phrases and the recording of
phrase sequences using the TRACK STATUS/PHRASE PAD buttons. When the
PHRASE PAD PLAY•PHRASE SEQ button is:
•
Unlit
—Phrase Pad and Phrase Sequence modes are turned off.
•
Green
—Phrase Pad mode is activated.
•
Red
—Phrase Sequence mode is activated.
•
Flashing red
—the phrase sequencer is recording.
9—IN 1-16•SOLO
Press the IN 1-16•SOLO button to assign the sixteen channel strips to Input Channels
1-16 (see Page 137). Hold SHIFT and press IN 1-16•SOLO to enter and exit Solo mode
(Page 143).
10—IN 17-24/AUX MST•MUTE
Press the IN 17-24/AUX MST•MUTE button to assign the first eight channel strips to
Input Channels 17-24 and the rest to the eight Aux master channels (see Page 137).
Hold SHIFT and press IN 17-24•MUTE to enter and exit Mute mode (Page 143.).
11—TR 1-16•MASTER EDIT
Press the TR 1-16•MASTER EDIT button to assign the sixteen channel strips to Track
Channels 1-16 (see Page 137). Hold down SHIFT and press TR 1-16•MASTER EDIT to
display the MASTER EDIT VIEW screen (Page 207, Page 209).
12—TR 17-24/FX RTN•V. FADER
Press the TR 17-24/FX RTN•V. FADER button to assign the first eight channel strips to
Track Channels 17-24 and the rest to the eight FX return channels (see Chapter 17).
Hold SHIFT and press TR 17-24/FX RTN•V. FADER to change the mixer into a MIDI
control surface (see Page 300).
13—MASTER FADER
The position of the MASTER fader sets the level of the main stereo MASTER mix bus.
Since the MONITOR outputs and the PHONES jacks are typically set to listen to the
MASTER mix bus, the position of the MASTER fader also affects your listening level.
VS2480OMUS.book 35 ページ ２００６年２月７日 火曜日 午後４時１６分