Roland VS-2480 Stereo Equalizer User Manual


 
7—Project and Drive Operations
Roland VS-2480 Owner’s Manual www.rolandus.com 107
RECOVER
To re-load VS-2480 project backup data, use the RECOVER operation. When you
recover a project, the project is restored to your internal hard drive in its original state.
You can also use project RECOVER to restore song backup and archive data from the:
VS-880 VS-880EX VSR-880
VS-890 VS-1680•VS-1880
When you recover a song from an earlier V-Studio, the VS-2480 converts it into a
VS-2480 project. You can recover song data from a Zip disk or CD. After the VS-2480
recovers the song, it’s loaded as the current project. If you’re importing multiple songs,
the last song the VS-2480 imports becomes the current project.
Recovering Backup Data
1. Press PROJECT.
2. Insert the medium containing the backup into the appropriate
CD-R/RW or Zip drive.
3. Select the drive containing the project backup data.
4. Press F6 (LIST) to view the drive’s contents. The VS-2480 displays:
5. Press ENTER/YES to change drives, or EXIT/NO to cancel the drive change.
6. Mark the project(s) you want to recover.
7. Turn the TIME/VALUE dial to select the drive to which you want to recover the
marked backup data.
8. If “Recovr” isn’t visible above F2, press PAGE until it is.
9. Press F2 (Recovr)—the PROJECT RECOVER screen appears.
RECOVER is available only when the selected drive contains project backup data.
See “V-Studio Song/VS-2480 Project Compatibility” on Page 412 for details on how
other V-Studios’ songs are transformed into VS-2480 projects.
If the project is backed up on more than one disk, insert the first
disk containing backup data.
PROJECT menu
F2 (Recovr)
New drive’s
name
List of project
backup data
you’ve marked
Drive
containing
backup
Drive to which
data will be
recovered
Press F2 to scroll down
through the list of
project backup data if it
extends out of view, or
F1 (Scrol) to scroll up
through the list.
VS2480OMUS.book 107 ページ 2006年2月7日 火曜日 午後4時16分