Roland VS-2480 Stereo Equalizer User Manual


 
Roland VS-2480 Owner’s Manual www.rolandus.com 359
28—Utility Menu Parameters
The UTILITY MENU contains a wide array of parameters. Some of its screens present
parameters that set the general behavior of the VS-2480—or its behavior when a
particular project is loaded—while others offer detailed control of specific VS-2480
features. This chapter describes what you’ll find in the UTILITY menu.
We’ve already explained many of the UTILITY menu’s screens and parameters in
earlier chapters—as we go through the UTILITY menu screens, we’ll refer you to
relevant descriptions elsewhere in the
VS-2480 Owner’s Manual
. They’re noted here for
completeness.
The Main UTILITY Menu Screen
To view the UTILITY menu:
1. Press UTILITY in the MENU area of the VS-2480’s top panel.
You can display any of the UTILITY menu’s screens by cursoring to it in the UTILITY
menu and pressing ENTER/YES, or by pressing its F button shown on one of tabbed
layers as the bottom of the screen.
The SYSTEM, GLOBAL, PLAY/REC and V.FDR buttons each lead to sets of related
screenfuls of parameters—these sub-screens are called “Param1”, “Param2” and, in the
case of the V.FDR screenset, “Param3.” To navigate between these screens, press F1
(Param1), F2 (Param2) or F3(Param3) as desired.
Many of the other UTILITY menu items also have sub-screens of their own, as
explained in their descriptions.
On some UTILITY menu screens, parameters are arranged in labeled groups. In the
following descriptions, we’ll organize parameters according to these groupings.
If you’re looking for an screen
whose F button is currently
hidden, press PAGE repeatedly
until its F button appears.
VS2480OMUS.book 359 ページ 2006年2月7日 火曜日 午後4時16分