Filter
Top Products
7—Project and Drive Operations
116 www.rolandus.com Roland VS-2480 Owner’s Manual
7. Press ENTER/YES to clear the drive, or EXIT/NO to cancel.
If you pressed ENTER/YES, the VS-2480 double-checks to make sure you want to
proceed, since you’re about to wipe everything on the selected drive/partition.
8. If you want to proceed, press ENTER/YES. To cancel the operation, press EXIT/NO.
9. If you pressed ENTER/YES, the VS-2480 asks if you want to save any recent changes
to the currently loaded project.
10. Press ENTER/YES to save the project before clearing the drive, or EXIT/NO to
proceed without doing so.
Drive Check
If you’re experiencing problems loading a project, copying it or backing it up, you can
run a Drive Check operation to determine if the problem is with your data—if not, you
may have a connection problem or a hardware malfunction. Drive Check examines the
directory that keeps track of where your files are, and seeks out potential problems
with your data. When it’s done, it displays a report of its findings.
Understanding the Drive Check Report
The most important part of the Drive Check Report is the line at its top left that either
says “No Err”—as in the illustration above—or “(x) Err,” where “x” equals the number
of errors found. If Drive Check does find errors, it lists them in the report—turn the
TIME/VALUE dial to view them. Items marked with “OK” have no problems.
Here’s what some of the terms in the report mean:
•
Cluster
—the smallest chunk of disk data the VS-2480 reads and writes.
•
Cross link (X-Link)
—a case in which audio from one project is mistakenly referenced
by another. This may cause one project’s audio to be heard during playback of
another.
•
Loose Area
—a chunk of orphaned audio data not associated with any project.
•
Directories
—the list of each drive’s files and where they’re located on the disk. If a
directory becomes confused or damaged, you may see “IllegalDIR” error messages.
This: Refers to:
Total Total number of clusters
Defect Number of damaged or unusable clusters
Used Number of clusters in use
Free Number of clusters not yet used
X-Link Err Number of cross links
Loose Area Number of orphaned clusters
Illegal Dir Number of directories with incorrect information
Read Error Number of data-reading problems during the check
Drive Check found no
problems with this drive.
VS2480OMUS.book 116 ページ ２００６年２月７日 火曜日 午後４時１６分