Filter
Top Products
© 2003 Shure Incorporated DFR22 Software Guide 63
Cut and Shelf Filters
Copy and Paste
Filter handle settings can be copied and pasted between “Cut and Shelf” processor windows.
To copy and paste filters:
1. Click to select a single filter, or select multiple filters using one of the following methods:
• Ctrl + Click.
• Use the [Edit>Select All] menu command.
2. Select the [Edit>Copy] menu command.
3. Open the “Cut and Shelf” processor window where you wish to paste filter settings.
4. Select the [Edit>Paste] menu command.
Shift + ¯
or Page Down
Decreases gain by 3 dB
Spacebar or right
mouse click
Sets gain to 0 dB
Delete Resets selected filter(s) to default settings
Note: Nudging the frequency by one screen pixel changes the value by approximately 1/100
of an octave, or 1%
Note: When filters are part of a multiple selection, they are highlighted in pink and their param-
eter settings are locked. To de-select from a multiple selection, press the Esc key or
click on any control outside the selection area.