Filter
Top Products
© 2003 Shure Incorporated DFR22 Software Guide 22
Processor Configuration
To add multiple processor blocks at once:
1. Ctrl + Click to select multiple empty slots.
2. Use the right-click contextual menu to select a processor.
- OR -
Use the [Processor>Add] option on the main menu bar.
3. The processor will populate all the slots that you selected.
Stereo Processors
Stereo processors are placed in the signal flow diagram in much the same way as the other modular processor
blocks. However, each of the stereo channels appears as a separate block. Double-clicking on either block will
open the parameter window for both channels.
Each of the following processors operate as a stereo pair:
To add a stereo processor block from the “Processor Toolbox:”
1. Click on a stereo processor block in the “Processor Toolbox.”
When you select a stereo processor from the “Processor Toolbox,” the cursor will appear somewhat differ-
ently than it does for other processors, as pictured in the following table.
2. Add the first channel of the stereo pair using one of the following methods.
a) Click and hold the left mouse button to drag a processor block from the “Processor Toolbox” to the sig-
nal flow diagram.
b) Release the mouse button to place the first processor channel at the current cursor location.
- OR -
a) Click once on a processor block in the “Processor Toolbox.”
b) Click again on the appropriate empty slot in the signal flow diagram.
3. The cursor changes to indicate you must place the second channel of the processor.
4. Click on the appropriate slot to add the second stereo channel.
To add a stereo processor using the menu:
1. Ctrl + Click to select empty slots on two different channels.
2. Use the right-click contextual menu to place both channels of the stereo pair.
- OR -
Use the [Processor>Add] option on the main menu bar.
Block Name Description
ST DFR 5 Stereo 5-Band DFR
ST DFR 10 Stereo 10-Band DFR
ST DFR 16 Stereo 16-Band DFR
ST COMP Stereo Compressor
Sft ST COMP Stereo Soft-Knee Compressor
ST LIM Stereo Limiter
Sft ST LIM Stereo Soft-Knee Limiter
Location where the first channel of the
stereo processor can be placed.
Location where the second channel of the
stereo processor can be placed.