Filter
Top Products
© 2003 Shure Incorporated DFR22 Software Guide 16
Establish Security
Establish Security
This is the final step in setting up the device. Before continuing, you should thoroughly read the Security section on
page 98. These instructions are intended only as an overview of the process.
1. Go Live with the DFR22
You must be in Live Mode to set device security. If you are in Design Mode, click the [Live Mode] button on the
control bar of the main window.
2. Set the Front Panel Lockout
Select [Security>Front Panel Lockout] from the main menu, which opens the “Front Panel Lockout” dialog. Select
the checkbox next to each front panel feature for which you wish to lockout end user access. Use this software fea-
ture to selectively lock out front panel controls. To lock out all front panel controls you can also set the fifth DIP
switch on the back of the device to the down position.
3. Set a Password
Select [Security>Set Password] from the main menu, which opens the “Create Password” dialog. Type in a pass-
word, press Tab, and then type it again to confirm. Click [OK].
4. Set the User Access Level
Select [Security>Set Level] from the main menu, which opens the “Set Security” dialog. Select the appropriate user
access level. Click [OK].