Filter
Top Products
© 2003 Shure Incorporated DFR22 Software Guide 44
Output Gain
Output Gain
The “Output Gain” window contains individual controls for both output channels. Double-click on the gain block at
the right end of either output channel strip to open this window, as pictured below in Figure 6-4.
1) Scaling Options
Use these buttons to scale each output channel to match the output level of the equipment in line after the
Audio Processor. Click to toggle between -10dBV or +4dBu levels. The default setting is +4dBu.
2) Signal Polarity
Click this button to invert the polarity of the signal exiting the output channel strip. The default setting is
normal polarity.
+4dBu selected
–10dBV selected
Normal polarity
Inverted polarity
1
2
3
4
5
6
7
FIGURE 6-4: “Output Gain” Window