Filter
Top Products
Chapter5—Recording on the AW4416
80 — Operation Guide
6. If you wish to set the input signals of INPUT jacks 1/2 as a stereo pair,
hold down [SEL] key 1 and press [SEL] key 2.
Adjacent odd-numbered → even-numbered input channels can be specified as a
stereo pair. You will find it convenient to pair two channels that are inputting a
stereo source, so that all mix parameters except for attenuation and pan will be
linked.
When you simultaneously press the two [SEL] keys, a CHANNEL PAIRING popup
window will appear, allowing you to specify how pairing will occur.
7. Move the cursor to either the “INPUT 1→2,” “INPUT 2→1,” or “RESET
BOTH” button, and press the [ENTER] key.
One of the following can be selected as the pairing method.
❍ INPUT x→y (x=odd number, y=even number)
The parameters (except for attenuation and pan) of the odd-numbered channel
will be copied to the even-numbered channel.
❍ INPUT y→x (x=odd number, y=even number)
The parameters (except for attenuation and pan) of the even-numbered channel
will be copied to the odd-numbered channel.
❍ RESET BOTH
The parameters of both channels will be reset to their initial settings.