Yamaha AW4416 Stereo System User Manual


 
Appendix
Appendix–52 — Reference Guide
STATUS 11110001 F1 Quarter Frame Message
DATA 0nnndddd dd nnn = message type (0-7)
dddd = data
4.6 SONG POSITION POINTER (F2)
< Transmission >
If MIDI Clock is being transmitted, Song Position Pointer
messages will be transmitted when the recorder stops or
locates, in order to indicate the song position at which play-
back should begin for the next Start/Continue.
STATUS 11110010 F2 Song Position Pointer
DATA 0ddddddd dd0 data (H) high 7 bits of
14 bits data
0ddddddd dd1 data (L) low 7 bits of 14
bits data
4.7 TIMING CLOCK (F8)
< Transmission >
If MIDI Clock is being transmitted, Timing Clock messages
are transmitted according to the MIDI tempo map whenever
the recorder is playing or recording (until it stops).
STATUS 11111000 F8 Timing Clock
4.8 START (FA)
< Transmission >
If MIDI Clock is being transmitted, this message is transmit-
ted when the recorder begins playback or recording from
the first measure.
STATUS 11111010 FA Start
4.9 CONTINUE (FB)
< Transmission >
If MIDI Clock is being transmitted, this message is transmit-
ted when the recorder begins playback or recording from a
location other than the first measure.
STATUS 11111011 FB Continue
4.10 STOP (FC)
< Transmission >
If MIDI Clock is being transmitted, this message is transmit-
ted when the recorder stops.
STATUS 11111100 FC Stop
4.11 ACTIVE SENSING (FE)
< Reception >
Once this message has been received, an interval of 300 ms
in which no message has been received will cause MIDI
communications to be initialized by clearing the running
status, etc.
STATUS 11111110 FE Active Sensing
4.12 RESET
< Reception >
If a Reset message is received, MIDI communications will
be initialized by clearing the running status, etc.
STATUS 11111111 FF Reset
4.13 EXCLUSIVE MESSAGES (F0-F7)
4.13.1 MMC STOP
< Transmission >
Transmitted with a device number of 7F when the STOP key
is pressed.
< Reception >
If the AW4416 is operating as the MMC SLAVE, it will stop
when this message is received if the device number
matches or is 7F.
STATUS 11110000 F0 System Exclusive Message
ID No. 01111111 7F Real Time System Exclu-
sive
Device ID 0ddddddd dd Destination (00-7E,
7F:all call)
Command 00000110 06 Machine Control Command
(mcc) sub-id
00000001 01 Stop (MCS)
EOX 11110111 F7 End Of Exclusive
4.13.2 MMC PLAY
< Reception >
If the AW4416 is operating as the MMC SLAVE, it will begin
playback when this message is received if the device num-
ber matches or is 7F.
STATUS 11110000 F0 System Exclusive Message
ID No. 01111111 7F Real Time System Exclu-
sive
Device ID 0ddddddd dd Destination (00-7E,
7F:all call)
Command 00000110 06 Machine Control Command
(mcc) sub-id
00000010 02 Play (MCS)
EOX 11110111 F7 End Of Exclusive
4.13.3 MMC DEFERRED PLAY
< Transmission >
Transmitted with device number 7F when the PLAY key is
pressed.
< Reception >
If the AW4416 is operating as the MMC SLAVE, it will begin
playback when this message is received if the device num-
ber matches or is 7F.
STATUS 11110000 F0 System Exclusive Message
ID No. 01111111 7F Real Time System Exclu-
sive
Device ID 0ddddddd dd Destination (00-7E,
7F:all call)
Command 00000110 06 Machine Control Command
(mcc) sub-id
00000011 03 Deferred play (MCS)
EOX 11110111 F7 End Of Exclusive
4.13.4 MMC FAST FORWARD
< Transmission >
Transmitted with device number 7F when the FF key is
pressed, or when the shuttle is rotated toward the right to
enter Cue mode.
< Reception >
If the AW4416 is operating as the MMC SLAVE, it will begin
fast-forward when this message is received if the device
number matches or is 7F.
STATUS 11110000 F0 System Exclusive Message
ID No. 01111111 7F Real Time System Exclu-
sive
Device ID 0ddddddd dd Destination (00-7E,
7F:all call)
Command 00000110 06 Machine Control Command
(mcc) sub-id
00000110 04 Fast Forward (MCS)
EOX 11110111 F7 End Of Exclusive
4.13.5 MMC REWIND
< Transmission >
Transmitted with device number 7F when the REWIND key
is pressed, or when the shuttle is rotated toward the left to
enter Review mode.
< Reception >
If the AW4416 is operating as the MMC SLAVE, it will begin
rewind when this message is received if the device number
matches or is 7F.
STATUS 11110000 F0 System Exclusive Message
ID No. 01111111 7F Real Time System Exclu-
sive
Device ID 0ddddddd dd Destination (00-7E,
7F:all call)
Command 00000110 06 Machine Control Command
(mcc) sub-id
00000101 05 Rewind (MCS)
EOX 11110111 F7 End Of Exclusive