Filter
Top Products
EQ/ATT/GRP screen
56 — Reference Guide
Library page
Store or recall EQ settings
[Function]
Store EQ settings in the EQ library, or
recall a stored EQ program.
[Key operation]
• [EQ] key → [F2] (Library) key
• Repeatedly press the [EQ] key until the
screen shown at the right appears.
[Mouse operation]
M button → EQ button → Library tab
[Screen functions]
A SEL CH
This indicates the currently selected channel.
B EQ graph
This graphically displays the EQ settings.
C Output meter
This meter shows the post-EQ output level.
D TITLE EDIT button
Use this to edit the name (library title) of the EQ
program stored in the EQ library. A library name
of up to 16 characters can be input. Move the
cursor to the TITLE EDIT button and press the
[ENTER] key to access the TITLE EDIT popup
window where you can input a name. For
details on inputting characters, refer to Opera-
tion Guide P.60.
Library numbers 1–40 are recall-only preset
memories, and their names cannot be
changed. Numbers in which no EQ program
has been stored are displayed as “No Data!,”
and their title cannot be changed.
E RECALL button
Recall the currently selected EQ program from
the list.
If you attempt to recall a number in which no
data has been stored, a message of “ERROR
NO DATA TO RECALL” will appear, and the
recall will not occur.
F STORE button
Store the current EQ settings.
• Library numbers 1–40 are recall-only preset
memories, and cannot be stored. You can
store only in library numbers 41–128.
• When you store, the EQ program that was
previously stored in that number will be
erased.
Tip!
G LIBRARY No. (library number)
This shows the library number 1–128.
H LIBRARY TITLE
This shows the names assigned to each library
number.
I ROM
A write-protect symbol is displayed for recall-
only programs (library numbers 1–40).
1
4
5
6
JK78 9
32