Yamaha AW4416 Stereo System User Manual


 
EDIT screen
100 — Reference Guide
D Pairing
By moving the cursor to this column and press-
ing the [ENTER] key, you can set/defeat pairing
for adjacent odd-numbered even-numbered
tracks. Paired tracks are indicated by a “
symbol, and unpaired tracks by a “ ” symbol.
When editing tracks or parts, both tracks of a
pair will be selected for editing.
E T (track)
This column shows the track numbers 1–16.
F NAME
This column shows the name of the virtual track
currently selected for each track 1–16. Tracks
that have already been recorded are assigned a
default name of “V. Tr x-y” (x=track number 1–
16, y=virtual track number 1–8). Tracks in
which nothing has been recorded will be dis-
played as “-NO REC-”.
A name of up to 16 characters can be
assigned to a virtual track, but this column
will show only the first eight characters.
G V (virtual track)
This shows the virtual track number (1–8) that is
currently selected for each track 1–16. Virtual
track numbers can be changed in the TRACK
screen V. Track page.
H Track view
In this area, the regions included in each track
are displayed as a bar graph. The vertical line in
the track view area indicates the location at
which the area for editing has been set. The
symbols displayed at the bottom of the track
view area indicate locate points and markers.
While editing, the track and area selected for
editing will be displayed as follows.
When selecting the edit source and edit destina-
tion tracks, as when copying or moving audio
data, the display will be as follows.
I Parameter settings
In this area you can set the necessary parame-
ters for executing the edit command.
Tip!
For the track editing procedure, refer to
Operation Guide “Chapter 9. Track/virtual
track operations.”
The keys of the transport section will have no
effect while the TR Edit page is displayed.
Additional functions in the TR
Edit page
In the TR Edit page you can press the [SHIFT] key to
assign the following additional functions to the
[F1]–[F3] keys.
[F1] (REMAIN) key
The level meter/counter and the counter area of
the display will show the remaining time avail-
able for recording. When you press the [SHIFT]
key + [F1] (REMAIN) key once again, the usual
counter display will reappear.
[F2] (X-ZOOM IN) key
Each time you press the [SHIFT] key + [F2] (X-
ZOOM IN) key, the track view 8 will zoom-in
on the time axis in three levels.
[F3] (X-ZOOM OUT) key
Each time you press the [SHIFT] key + [F3] (X-
ZOOM OUT) key, the track view 8 will zoom-
out on the time axis in three levels.
Track to be edited Edited area
Edit source track
Edit destination track
Edit source area
Edit destination area
F1 F2 F3