Yamaha AW4416 Stereo System User Manual


 
Chapter9—Track and virtual track operations
— Operation Guide 163
REGION menu
These commands edit data in units of regions.
NAME
Assign a name to a region.
ERASE
Erase the selected region. Audio data following that region will not be affected.
DELETE
Delete the selected region. Audio data following that region will move forward
by the length of the deleted data.
COPY
Copy the selected region to the specified location of the specified track. You can
also specify the number of times the data will be copied, and the interval
between copies. If audio data exists at the copy destination, you can specify
whether the copied data will be inserted or overwritten.
MOVE
Move the selected region to the specified location of the specified track. At this
time, the move source region will be erased. If audio data exists at the move des-
tination, you can specify whether the moved data will be inserted or overwritten.
DIVIDE
Divide the selected region into two at the location you specify.
TRIM IN
Trim the starting location of the selected region toward the end in sample units.
TRIM OUT
Trim the ending location of the selected region toward the beginning in sample
units.
T-COMP (Time Compression/Expansion)
Compress or expand the length of the audio data in the selected region. (As the
length changes, the pitch will change correspondingly.) The RATIO parameter
specifies the amount of compression or expansion (50%–200%).
PITCH (Pitch Change)
Change only the pitch without affecting the length of the audio data of the
selected region. The PITCH parameter specifies the change in semitones (maxi-
mum ±12 semitones) and the FINE parameter specifies the change in one-cent
steps (maximum ±50 cents).