Filter
Top Products
EDIT screen
104 — Reference Guide
● INSERT
Insert a length of silence into the selected part.
Subsequent audio data will be moved backward
by the length of the inserted silence.
• TRACK
Select the track into which you wish to insert
silence. For the Insert command, you can spec-
ify all tracks as the subject of the operation. To
do so, rotate the [DATA/JOG] dial all the way
clockwise when setting the TRACK parameter,
to make the selection read “AL-C” (ALL-CUR-
RENT). With this setting, the START→END por-
tion of the virtual tracks currently selected for
tracks 1–16 will be selected for the operation.
•START
Specify the starting location of the part into
which silence will be inserted.
• END
Specify the ending location of the part into
which silence will be inserted.
• ALL V.TR (all virtual tracks)
Select whether silence will be inserted into all
virtual tracks included in the selected track(s)
(YES) or only into the currently selected virtual
track (NO).
• EXECUTE
Execute the command.
● T-COMP (time compression/expansion)
Compress or expand the length of the selected
part in a range of 50%–200% without affecting
the pitch.
• TRACK
Select the track that you wish to compress/
expand.
•START
Specify the starting location of the part that you
wish to compress/expand.
• END
Specify the ending location of the part that you
wish to compress/expand.
• RATIO
Specify the compression/expansion ratio in
units of 0.01% (range: 50–200%).
• EXECUTE
Execute the command.
AB
AA’
START END
B
INSERT
START END
START END
T-COMP (time compression)
(50%)
T-COMP (time expansion)
(150%)