Filter
Top Products
— Reference Guide 115
AUTO
MIX
AUTOMIX screen
Main page
Make basic automix settings
[Function]
Make basic settings for recording
and playing automix.
[Key operation]
• [AUTO MIX] key → [F1] (Main)
key
• Repeatedly press the [AUTO
MIX] key until the screen shown
at the right appears.
[Mouse operation]
M button → AMIX button → Main
tab
[Screen functions]
A AUTOMIX
Turn automix on (ENABLE) or off (DISABLE). If
this button is set to “ENABLE,” automix record-
ing or playback will begin automatically when
the song is started.
B FREE
This shows the free area of automix memory in
kilobytes and as a percentage.
C SIZE
This shows the sizes in kilobytes of the current
automix and of the undo buffer.
Tip!
The undo buffer is dedicated memory for
automix undo, and contains the automix data
prior to the last operation.
D FADER EDIT OUT
This setting specifies how the fader and other
parameter values will change when automix
recording ends.
● END
If this button is on, all subsequent recorded
events of the same parameter will be erased
when you finish editing fader or other parame-
ter data.
● RET
If this button is on, the fader will return to the
previously-recorded value when you finish edit-
ing fader data. (The time over which it returns to
the original value can be set in the Fader Edit
page. → P.121)
If this button is off, the value at which fader
editing ended will be maintained until the next
time the fader changes.
Tip!
• The AW4416 remembers the previously-
recorded fader movements even when you
are editing fader operations. If you leave the
RET button turned on, the fader will auto-
matically return to the previous location
when editing ends, which is convenient
when you are editing only a portion of the
fader operations.
• If you want the fader locations at which edit-
ing ended to be maintained to the end of the
automix, it is convenient to turn on the END
button.
5
7
9
8
1
2 3
6
4
J