Filter
Top Products
VIEW screen
— Reference Guide 47
Library page
Store or recall channel settings
[Function]
Store the settings of the currently selected
channel into the channel library, or recall
stored settings.
[Key operation]
• [VIEW] key → [F2] (Library) key
• Repeatedly press the [VIEW] key until
the screen shown at the right appears.
[Mouse operation]
M button → VIEW button → Library tab
[Screen functions]
A Channel
This indicates the currently selected channel.
B EQ/DYN./DELAY settings
This area shows the EQ/dynamics processor/
delay settings for the channel.
C Input meter
This meter shows the input level of the channel.
D TITLE EDIT button
Use this to edit the name (library title) of the set-
tings stored in the channel library. Move the
cursor to the TITLE EDIT button and press the
[ENTER] key to access the TITLE EDIT popup
window where you can input the name. For
details on inputting text, refer to page 60 of the
Operation Guide.
Library numbers 0 and 1 are recall-only pre-
set programs, and their names cannot be
edited. Also, numbers in which channel set-
tings have not been stored will be displayed
as “No Data!,” and their title cannot be
edited.
E RECALL button
Recall the currently selected settings from the
list.
If you select a number in which nothing has
been stored and attempt to recall it, an error
message of “ERROR NO DATA TO RECALL”
will be displayed, and recall will not be pos-
sible.
F STORE button
Store the current channel settings.
Library numbers 0 and 1 are recall-only pre-
set programs; data cannot be stored in them.
Data can be stored only in library numbers
2–64.
G LIBRARY No. (library number)
This shows the library number 1–64.
H LIBRARY TITLE
This shows the name assigned to the library.
I ROM
This write-prohibit symbol is displayed for
recall-only numbers 0/1.
J SOURCE CHANNEL
This shows the original channel from which the
settings were stored. For preset numbers 0/1 this
is displayed as “GENERAL.”
3
1
4
5
6
2
78 9 J