Filter
Top Products
DYN/DLY screen
— Reference Guide 65
Dly/ø1–16, Dly/ø17–24,
Dly/øMONI pages
Set delay and phase
[Function]
Set the delay and phase of each channel.
[Key operation]
• [DYN] key → [F3] (Dly/ø1–16) key, [F4]
(Dly/ø17–24) key/[F5] (Dly/øMONI)
key
• Repeatedly press the [DYN] key until
the desired page appears.
[Mouse operation]
M button → DYN button → Dly/ø1–16
tab, Dly/ø17–24 tab, Dly/øMONI tab
[Screen functions]
A Channel
This displays the channels for which
you can make delay and phase set-
tings.
B DELAY
Set the delay time for the signal of
each channel. The upper row shows
the delay in ms (millisecond) units,
and the lower row shows the delay in
sample units. Adjusting either one will
cause the other value to change in
tandem.
C ON/OFF
Switch the delay on/off.
D ø (phase)
Switch the phase of each channel.
Tip!
Phase (ø) will operate indepen-
dently even for paired channels.
1
3
4
2
● Dly/ø1–16
1
3
4
2
● Dly/ø17–24
1
3
4
2
● Dly/øMONI