Filter
Top Products
SET UP screen
— Reference Guide 25
Dither TRK page
Specify dithering and word length for tracks
[Function]
Turn dithering on/off and specify the word
length for recording on tracks 1–16 of the
recorder.
[Key operation]
• [SETUP] key → [F2] (Dither TRK) key
(*1)
• Repeatedly press the [SETUP] key until
the screen shown at the right appears.
*1. In the SET UP screen, the tabs dis-
played at the bottom of the screen are
divided into two groups. If the Dither
TRK tab is not assigned to the [F1] key
when you press the [SETUP] key, press
the [SHIFT] key + [F1] (CHANGE TAB)
key to switch the tabs.
[Mouse operation]
M button → SETUP button → Dither TRK
tab
[Screen functions]
A REC TRACK
In pairs of adjacent odd-numbered → even-
numbered tracks (tracks 1/2, 3/4 ...), this indi-
cates the tracks for which you can specify dith-
ering and word length. The settings for the
stereo track are common to tracks 1/2.
B ON/OFF (dithering on/off)
Turn dithering on/off for the data that is
recorded on adjacent odd-numbered → even-
numbered tracks.
C WORD LENGTH (BIT)
Select the word length (number of bits) for the
data that is recorded on adjacent odd-num-
bered → even-numbered tracks. Set this to
match the quantization (number of bits) that
you selected when creating the song.
■ Additional functions in the Dither
TRK page
In the Dither TRK page, you can press the [SHIFT]
key to assign the following function to the [F1] key.
• [F1] (CHANGE TAB) key
Switch between the two types of tab display.
32
1
F1