Filter
Top Products
Chapter12—Sampling pads
— Operation Guide 191
Buttons for setting the TRIM IN/TRIM OUT command parameters will appear.
3. Move the cursor to the PAD button, and press the [ENTER] key.
The cursor will move to the PAD No. area in the lower right.
4. Use the [CURSOR] keys and the [DATA/JOG] dial to select the pad bank
and pad number that you wish to trim.
5. Press the [ENTER] key.
The cursor will return to the PAD button.
6. Move the cursor to the TRIM IN button (if editing the playback start
location) or the TRIM OUT button (if editing the playback end location),
and press the [ENTER] key.
The cursor will move to the trim value field.
1 TRIM IN/TRIM OUT
Here you can specify the amount of trimming in units of a sample.
B Bank/pad number
This displays the bank and pad number of the currently selected pad.
C PAD SIZE
This displays the length of the currently assigned sample, in units of one sample.
1 2 3