Filter
Top Products
SAMP. PAD screen
— Reference Guide 81
SAMP.
PAD
■ Additional functions in the From
Rgn. page
In the From Rgn. page you can press the [SHIFT]
key to assign the following additional functions to
the [F1]–[F3] keys.
• [F1] (REMAIN) key
This causes the counter/level meter and the
counter at the top of the display to show the
remaining time available for recording in the
trigger list. For details on the trigger list, refer to
the explanation for the “SAMP.PAD screen/
Trig.List page” (→ P.88). When you press the
[SHIFT] key + [F1] (REMAIN) key once again,
the usual counter display will reappear.
• [F2] (X-ZOOM IN) key
Each time you press the [SHIFT] key + [F2] (X-
ZOOM IN) key, the track view 7 will zoom-in
horizontally (three stages).
• [F3] (X-ZOOM OUT) key
Each time you press the [SHIFT] key + [F3] (X-
ZOOM OUT) key, the track view 7 will zoom-
out horizontally (three stages).
Tip!
For the procedure of assigning a region to a
pad, refer to Operation Guide “Chapter 12.
Sampling pads.”
F1 F2 F3