Yamaha AW4416 Stereo System User Manual


 
— Reference Guide 99
EDIT
EDIT screen
TR Edit page
Edit tracks
[Function]
Assign a name to each track, and edit
audio data by tracks, parts, or regions.
[Key operation]
• RECORDER [EDIT] key [F1] (TR Edit)
key
• Repeatedly press the RECORDER
[EDIT] key until the screen shown at
the right appears.
[Mouse operation]
M button RECORDER EDIT button
TR Edit tab
[Screen functions]
A TRACK menu
B PART menu
C REGION menu
Select one of the following three units of data
that you wish to edit.
Track
Edit the audio data of the entire currently
selected track (1–16).
Part
Within the currently selected track, edit the
specified area of audio data.
Region
Edit a piece of continuous audio data that was
recorded in a single operation.
When you move the cursor to the desired menu
and press the [ENTER] key, a list of buttons will
appear, allowing you to select an editing com-
mand (center column in the illustration at right).
When you then move the cursor to the desired
command and press the [ENTER] key, a list of
buttons for setting the parameters of that com-
mand will appear (right column in the illustra-
tion at right).
For details on the commands and parameters
that can be selected from the TRACK/PART/
REGION menus, refer to page 101.
Tip!
If you move the cursor to the command
whose button is highlighted and press the
[ENTER] key, you will return to the command
list. If you move the cursor to the menu high-
lighted at the top of the list and press the
[ENTER] key, you will return to the first
menu.
4
1
2
3
8
5 6 7 9
Menus Commands Parameters