Filter
Top Products
EDIT PROGRAM - SINGLE
CD3000XL OperatorÕs Manual Page 63
NOTES ABOUT ASSIGNABLE PROGRAM MODULATION
1. When loading S1000 or S1100 library disks (which do not have APM), the CD3000XL
loads the assignments of the S1000/S1100 - i.e. the fixed assignments. Again, as a result,
you need not worry about having to set these assignments yourself. On library disks
developed for the CD3000XL, you will see the assignments made by our sound
programmers. Please study these and see if you can learn from them.
2. It is possible to route the same controller twice (or three times in some cases) to the same
destination. This is not an oversight but simply a way to keep things simple and open
ended. If you were, for example to route LFO1 to filter cutoff three times at a value of +50
you would simply get three times more LFO sweep.
3. As just mentioned, you can route the same controller to the same destination several
times. Please be aware that if you assign, for example, LFO2 to filter cutoff twice and set a
value of +50 and -50 respectively, you will get no effect as the two cancel each other out.
4. You will note that assigning a particular controller to a destination WILL ROUTE THAT
CONTROLLER TO ALL KEYGROUPS. The control inputs at any destination are not
keygroup specific but affect all keygroups the same.