Filter
Top Products
EDIT PROGRAM - SINGLE
Page 106 CD3000XL OperatorÕs Manual
ENV2 - SHAPING THE FILTER
Access to ENV2 is also via the KGRP or FILT page. However you arrive there, the screen looks
like this:
This is a 4-stage envelope generator with 4 rates going to 4 levels. Basically, Rate 1 goes to
Level 1, Rate 2 to Level 2, Rate 3 to Level 3 (which is also the sustain) and Rate 4 goes to
Level 4. Again you have a choice of templates from which to choose a variety of preset
envelopes (probably a bit more necessary in light of the added complication of a multi-stage
envelope) and this works on the same principle as ENV1’s templates except that there are
more of them.
Some of the possible envelope shapes you can create using envelope 2 are shown below:
The second page of envelope parameters can be accessed by pressing . You will
receive this screen:
Here we have similar parameters to ENV1.
This sets how much velocity will determine the speed of rate
1.
This sets how much the note-on velocity will affect the speed
of rate 4.
This sets the amount by which MIDI note off velocity will affect
the speed of rate 4.
This will set how much key position will affect both rate 2 and
rate 4.
This sets how much velocity will control the modulation output
of ENV2. This parameter can be used very effectively in
regulating dynamics through key velocity. All parameters’
ranges are +/-50.