Filter
Top Products
FLASHROM
CD3000XL OperatorÕs Manual Page 283
FORMATTING THE FLASHROM
As with a hard disk, the FlashROM needs to be formatted. This will arrange the memory on the
board(s) to be ready to accept sound data and/or operating systems. Formatting should be
performed when you first install the board(s).
To format the FlashROM on CD3000XL, go to SAVE and press FORM (F6). You will see this
screen:
As with disk formatting, you may select the type of format you wish to perform. In the example
shown above, FLASH is selected. Press F7 - FORM - to format the board(s). As with formatting
disks, you will receive the usual prompts to guard against accidental erasure of data. You
should press YES or NO according to your preference.
WARNING
WHEN FORMATTING THE FLASHROM BOARD, PRESSING “YES” TO
PROCEED WITH THE FORMAT WILL ERASE ALL DATA ON THE FLASHROM
BOARD(S). THIS DATA CAN NEVER BE RETRIEVED.
NOTE: While the programs and/or samples in FlashROM are active, formatting or deleting
cannot be performed in order to prevent an accidental erasure.