Filter
Top Products
Displaying Waveforms
CSA8000B & TDS8000B User Manual
3-65
Overview Related control elements and resourcesTo control a Mag view (cont.)
Set horizontal
display
parameters
3. Use the Horizontal knobs (see right) to achieve a good
display of the waveform i n the Mag time base.
Time base set tings for Channel waveforms will be
adjusted as you use the control s; the cont rols will be
inoperable if you have a reference or a math waveform
selected.
Note that t he M ag1 markers enclose a segment of Main
view that appears across the 10 division width of the
Mag view. See below.
Portion magnified inthe Mag1 time baseview
Main
Mag
Divider
bar
For more
information
4. Press t he Horizont al Menu front-panel button. Click
the icon in the the upper-right corner of the Horiz
Setup dialog box, and then click any dialog-box
control to pop up hel p on that control.
5. Click the Help button in the Horiz Setup dialog box to
access a context-sensitive overview on the horizontal
controls and their set up.
See AccessingOnline Help onpage 3--167 for an
overview ofthe onlinehelp system.
End of Procedure