Displaying Waveforms
3-64
CSA8000B & TDS8000B User Manual
Overview Related control elements and resourcesTo control the Main view (cont.)
Explore the
Mag time base
controls
10. The next procedure describes how to set up and
control the Mag time bases.
See To DisplayWaveforms ina MagView on page3--64.
End of Procedure
Use the procedure that follows to become familiar with the display adjustments
you can make when using the Mag 1 and Mag 2 time base views.
Overview To control a Mag view Related control elements and resources
Prerequisites 1. Set up as f rom the last procedure. See right.
See To DisplayWaveforms inthe Main Timebase
on page3--62.
Turn on a Mag
view
2. Push the Mag1 or Mag2 View button (turns
amber) t o dis play a Mag view. (See right.)
A numbered butt on l ights when its waveform is
on:
H Lighted green: view is on but not selected
H Lighted amber: view is on and selected
Tip. Drag t he divider bar bet ween the two views t o
adjust the di splay hei ght between them. See the
figureinstep3.
To Display Waveforms
in a Mag View