Pioneer AVIC-N4 Speaker System User Manual


 
76
Chapter 5
Customizing Your Navigation System NAVI
Close-up of Junction
This setting enables switching to an enlarged
map around the point where your vehicle is
approaching an intersection, entrance/exit of
freeway or a junction.
On*:
Switches to an enlarged map.
Off:
Does not switch to an enlarged map.
Arrow in AV
Set whether to display the guidance information
with arrows on the AV Operation screen.
On*:
Displays guidance information with arrows on
the AV Operation screen.
Off:
Does not display guidance information with
arrows on the AV Operation screen.
Defined Locations
Touch “Defined Locations” in the Settings
menu to display.
Set ”Home”
Registering and changing your home location
Page 55
Map in Memory
The memory area is the area in the map, which is
being read in advance for the memory navi mode.
There are two ways of setting the memory area.
Around Current Position
A square that has sides of approximately
10.6 miles (17 km) with the selected location at
the center is read into the memory.
Indicate the map you want to store in the memory
by touching , , or . Then, adjust the map
scale to the one you desire, and touch “OK”.
Continuously touching , , or allows you
to rapidly scroll the map screen.
An area not stored in the DVD Map Disc can-
not be memorized.
Around Current Route
Sets the surrounding currently set route to the
memory area. The route to the destination will
appear on screen. You can memorize the area by
touching “OK”.
The extent of the information that can be set
in the memory area is about 6.6 miles (10.6
km) surrounding the route.
Set ”Go To”
Registering and changing your favorite loca-
tion Page 55
Demo Mode
This is a demonstration function for shops. After
a route is set, a simulation of route guidance to a
destination is automatically displayed. Normally,
set this to “Off”.
Repeat:
Repeat demo drive.
Off*:
Demo Mode is set off.
If you eject the DVD Map Disc during the
demo drive, the demo mode will be stopped.
Time
Adjusts the systems clock. The time difference
(+, –) between the time originally set in your navi-
gation system is set here.
You can also select summer time On/Off.
Time settings Page 137
Summer Time
Choose whether or not to take summer time into
account.
On:
Summer time is taken into account.