Filter
Top Products
101
Chapter 7AV
Using the AV Source (Pioneer AV Equipment)
(5) SIRIUS channel select mode indicator
Shows what channel select mode has been
selected. You can select a channel from all chan-
nels in ALL CH mode, and select a channel from
the selected category in CATEGORY mode.
➲ “Switching the SIRIUS channel select mode”
➞ Page 101
(6) Detailed information or preset list display
(7) Category icon
1 Touch “SIRIUS” in the AV Source screen
to select the SIRIUS tuner.
➲ “Selecting an AV source” ➞ Page 32
2 Touch “Band” to select a SIRIUS band.
Touch “Band” repeatedly until the desired SIR-
IUS band is displayed, SIRIUS1, SIRIUS2 or
SIRIUS3.
3 To perform tuning, touch or .
The channels move up or down. Channels that
cannot currently be selected are skipped, and
the next channel is selected. If you keep
touching or , you can increase
or decrease channel number continuously.
You can also perform manual tuning by press-
ing the or button.
Switching the SIRIUS channel
select mode
You can switch modes between the two methods
for selecting and listing channels.
ALL CH Mode:
You can select a channel from all channels.
CATEGORY Mode:
You can select a channel within selected cate-
gory.
1 Touch “Mode” to select the desired chan-
nel select mode.
Touch “Mode” repeatedly to switch between
the two modes.
Switching between the detailed
information display and the pre-
set list display
You can switch the left side of the basic screen
according to your preference.
1 Touch “Detail” (or “Preset”).
Each touch of “Detail” (or “Preset”) changes
the detail information display or preset list dis-
play.
Storing and recalling broadcast
stations
If you touch any of the preset tuning keys
Preset 1 — Preset 6 to easily store up to six
broadcast stations for later recall with the touch
of a key.
1 Select the channel that you want to store
in memory.
2 Touch “Preset” to display the preset list.
3 Keep touching a preset tuning key
Preset 1 — Preset 6 until the SIRIUS pre-
set number (e.g., P.CH 1) stops flashing.
The number you have touched will flash in the
SIRIUS preset number indicator and then
remain lit. The selected station has been
stored in memory.
The next time you touch the same preset tun-
ing key Preset 1 — Preset 6 the station is
recalled from memory.
Detail information display
(e.g. ALL CH mode)
Preset list display
(e.g. ALL CH mode)
SIRIUS channel information
SIRIUS