Filter
Top Products
59
Chapter 4 Editing the Navigation UtilitiesNAVI
Using XM NavTraffic Informa-
tion
If you have a GEX-P10XMT XM Digital Satellite
Data & Audio Receiver (sold separately) attached
to the navigation system, and have an active sub-
scription to XM NavTraffic service, you can view
current traffic conditions and information on your
navigation display. When the unit receives
updated traffic information, the navigation sys-
tem will overlay the traffic information on your
map, and also display detailed text information
when available. When you are traveling along a
route and there is traffic information on your cur-
rent route, the system will automatically detect it,
and ask you if you would like to be rerouted. (In
such case, route calculation takes into consider-
ation about 90 mile radius of alternative routes
and its traffic conditions from your current loca-
tion).
❒ The term “traffic congestion” in this section
indicated the following types of traffic infor-
mation: stop and go, stopped traffic and
closed/ blocked roads. This information is
always taken into consideration when check-
ing your route, and the information related
with these events cannot be turned off. Addi-
tionally, the system also takes into consider-
ation the traffic flow information if “Use the
traffic flow information” is “On”.
Viewing traffic list
Traffic Information is displayed onscreen in a list.
This allows you to check how many traffic inci-
dents have occurred, their location and their dis-
tance from your current position.
Checking all traffic information
1 Touch “Info/Traffic” in the NAVI MENU,
then touch “Traffic Events”.
The list with received traffic information is
shown.
2 Touch or to view the incident list.
Places (street names) where incidents have
occurred are displayed in the list.
(1) Street or place
(2) Direction
(3) Incident
(4) Distance to the location
(5) The incident numbers currently dis-
played and the total number of incidents
❒ The incidents that have already been read
will be displayed in letters with a white out-
line. Unread incidents will be in white.
❒ Touching the allows you to check the
place on a map. (Traffic information with-
out positional information cannot be
checked on a map.)
:
You can sort the traffic information in alpha-
betical order.
:
You can sort the traffic information according
to the incident.
:
You can sort the traffic information by dis-
tance from your current position.
:
When new traffic information is received, cur-
rent information is changed or old information
has been removed, the list is updated to
reflect the new situation.
3 Select an incident you want to view in
detail.
The details of the selected incident are dis-
played.
❒ Touching an incident you want to see
allows you to view the detailed information
of the incident. If the information cannot
be displayed on one screen, touch or
to view the remaining information.
4 Touch “Back” to return to the list with
traffic information.
A list with traffic information appears again.
(3)
(1) (2) (5)(4)