Filter
Top Products
129
Chapter 8 Customizing the AV Source SettingAV
2 Press the MENU button to change to the
AV MENU.
3 Touch “Initial”.
Setting the rear output and sub-
woofer controller
The navigation system’s rear output (rear speaker
leads output and RCA rear output) can be used
for full-range speaker (Rear SP Full) or sub-
woofer (Rear SP Sub. W) connection. If you
switch the rear output setting to the Rear SP
Sub. W, you can connect a rear speaker lead
directly to a subwoofer without using an auxiliary
amp.
Initially, the navigation system is set for rear full-
range speaker connection (Rear SP Full). When
rear output is connected to full range speakers
(when Rear SP Full is selected), you can con-
nect the RCA subwoofer output to a subwoofer.
In this case, you can select whether to use the
subwoofer controller’s (low pass filter, phase)
built-in Preout Sub. W or the auxiliary Preout
Full.
❒ When 5.1ch setting is “On”, the rear output
and subwoofer setting is not available.
1 Touch “Rear SP” in the Initial menu.
2 Touch “Rear SP” to switch the rear out-
put setting.
When no subwoofer is connected to the rear
output, select Full.
When a subwoofer is connected to the rear
output, select Sub. W.
❒ When the rear output setting is Sub. W,
you cannot change the subwoofer control-
ler.
3 Touch “Preout” to switch the subwoofer
output or non fading output.
❒ Even if you change this setting, there is no
output unless you turn “Non Fading” or
“Sub Woofer” in the Sound menu “On”.
➲ “Using non fading output” ➞ Page 125
➲ “Using subwoofer output” ➞ Page 125
❒ If you change the subwoofer controller
(Rear SP), the subwoofer output (Sub
Woofer) and non fading output (Non Fad-
ing) in the Sound menu return to the fac-
tory settings.
❒ Both rear speaker leads output and RCA
rear output are switched simultaneously in
this setting.
Editing the PIN code
You can edit the PIN code you like. Use this func-
tion when you need to change the PIN code from
the default setting.
1 Touch “PIN Edit” in the Initial menu.
2 Touch number key to enter the new PIN
code.
3 Touch “Enter” to fix the new PIN code.
❒ The default setting of the PIN code is 0000.
Switching the sound muting/
attenuation
Sound from this system is muted, attenuated or
mixed automatically in the following cases:
• When a call is made or received using a cellu-
lar phone connected to navigation system.
• When the voice guidance is output.
❒ The sound muting/attenuation function does
not work when you use a cellular phone con-
nected to the navigation system via the Blue-
tooth adapter, which is sold separately.
❒ When 5.1ch setting is “On”, the sound mut-
ing/attenuation setting is not available.
Version of the Bluetooth module
System (microprocessor) version
PIN code
Bluetooth Device (BD) address
Initial Settings