Filter
Top Products
53
Chapter 3 Setting a Route to Your DestinationNAVI
Avoid Toll Road
This setting controls whether toll roads (including
toll areas) should be taken into account.
On:
Calculate a route that avoids toll roads (including
toll areas).
Off*:
Calculate a route that may include toll roads
(including toll areas).
❒ The system may calculate a route that
includes toll roads even if “On” is selected.
Designate Areas to Avoid
➲ About Areas to Avoid ➞ Page 49
Perform the route calculation for
several route options, and select
one
You can get route calculations for several route
options. After route options are calculated, select
the one you want.
1 Set the “Number of Routes” to “Multi-
ple”.
2 Search your destination and set the route.
Calculated routes are shown in different col-
ors (from two to six routes).
3 Touch “Next” to change the displayed
route.
The following information is displayed on this
screen:
(1) Route calculation condition
Displays the conditions set by the Route
Options menu by icon.
• Use/avoid freeway
• Use/avoid toll road
• Use/avoid ferry
Displays the inability of fulfill the conditions by
icon.
• Pass through Area to Avoid
• Use toll road although the setting
“Avoid Toll Road” is “On”.
• Use Ferry although the setting “Avoid
Ferry” is “On”.
(2) Distance to your destination
(3) Travel time to your destination
❒ The “Avoid Freeway” setting may not be
reflected, depending on the distance to the
destination.
❒ You can see other places while displaying
a possible route by scrolling the map.
Touching “Next” moves the next candidate
route to the center and indicates the map.
4 Touch “Information” to check the infor-
mation on the selected route.
You can also check details of the roads along
the selected route. (If you touch “Back”, you
can return to the previous display.)
➲ “Route Scroll” ➞ Page 46 (Step 3, 4 and
5)
➲ “Route Profile” ➞ Page 47 (Step 3 and 4)
❒ After the route is calculated, it may take
some time until the detailed route informa-
tion (Route Profile) is displayed.
5 Touch “OK”.
The route you selected is accepted, and the
map of your surroundings appears. When you
start driving, the route guidance begins.
❒ If the above operations are not performed
within 30 seconds after the route calcula-
tion is completed and you have already
started your vehicle, the route selected at
the time is automatically chosen.
(1) (3) (2)