32
Chapter 1
Basic Operation NAVI/AV
Basic AV Source
This section describes basic AV operations, such
as adjusting the volume, switching the source
and stopping the source, using CD operations as
an example.
Selecting an AV source
1 Press the VOLUME knob (or AV button) to
switch to the AV operation screen.
2 Press the MENU button to change to the
AV MENU.
3 Touch the source icon to select the
desired source in the AV Source screen.
❒ Also, press the VOLUME knob repeatedly
when the AV operation screen is displayed to
switch between sources:
“DISC” [CD, ROM, DVD-V, DivX] (built-in DVD
drive) — “RADIO” (tuner) — “iPod” (iPod) —
“XM” (XM tuner) — “SIRIUS” (SIRIUS tuner)
— “USB” (USB) — “BT-TEL” (Bluetooth Tele-
phone) — “BT-AUDIO” (Bluetooth Audio) —
“M-CD” (multi-CD player) — “M-DVD” (multi-
DVD player) — “AV-1” (video input1) — “AV-
2” (video input2) — “EXT-1” (external unit 1)
— “EXT-2” (external unit 2) — “OFF” (source
off)
❒ Touch “OFF” to switch the source to OFF.
❒ Touch “REAR SCREEN” to select the source
for Rear display.
➲ “Selecting the video for “Rear display”” ➞
Page 130
❒ Touch “TRAFFIC” to switch to XM or SIR-
IUS screen that memorized traffic channel.
➲ “Using the direct traffic announcement
function” ➞ Page 99, 103
❒ Sources that are not connected to the naviga-
tion system, sources that are busy reading a
disc or magazine, and sources with incom-
plete settings cannot be used.
❒ The term “external unit” refers to a Pioneer
product (such as one available in the future)
that, although incompatible as a source,
enables control of basic functions by the navi-
gation system. Two external units can be con-
trolled by the navigation system. When two
external units are connected, the navigation
system allocates them to external unit 1 or
external unit 2.
❒ When the “Antenna Control” mode is set to
“Radio”, the vehicle’s antenna can be stowed
or turned off by following the instructions
below.
— Change the source from radio (AM or FM)
to another source.
— Turn the source off.
— Turn off the ignition switch (ACC OFF).
If the “Antenna Control” mode is set to
“Power”, the vehicle’s antenna can be stowed
or turned off only when the ACC is set to
“OFF”.
➲ “
Antenna Control” ➞ Page 132
Adjusting the volume
1 Use the VOLUME knob to adjust the audio
sound level.
With this product, rotate the VOLUME knob
to increase or decrease the volume.
❒ To adjust the navigation volume (voice
guidance), access “Volume” in the NAVI
MENU.
➲ Navigation volume adjustment ➞ Page 73