Filter
Top Products
37
Chapter 2 Navigation Menu and Map DisplayNAVI
: Volume Setting
The sound volume for the navigation can be
set.
➲ Setting the guidance volume ➞ Page 73
: Menu Close
Hides the shortcut menu.
How to Use the Map
Most of the information provided by your naviga-
tion system can be seen on the map. You need to
get to know how the information that appears on
the map.
Switching the current position
screen display mode
There are four types of map display and two addi-
tional view modes.
• Map View
• Driver’s View
• Guide View (during route guidance only)
• Route View (during route guidance only)
• Vehicle Dynamics
• Rear View (Only possible when the “Camera”
is set to “On”.)
❒ If you deviate from the route when the view
mode is Route View or Guide View and
enter a street not recorded on the disc, the
screen changes to Map View. When you
return to the route, the screen returns to the
original view and resumes route guidance.
1 Press the MAP button to display a map of
the area around your current position.
2 Press the MAP button again.
3 Touch the mode name or press the MAP
button to select the mode you want to dis-
play.
❒ If the mode is selected by pressing the
MAP button, the screen automatically
switches to the selected map display mode
after 4 seconds.
How to view the map of the cur-
rent location
Map View
Displays the standard map.
Driver’s View
Displays the map from the driver’s viewpoint.
• In Driver’s View, a small gauge with no
scale is depicted, but is not intended to be
used as a speedometer. Use the actual
speedometer of your vehicle to confirm
speed.
(1)
(5)
(16)
(4)
(10) (8)
(2)
(11)
(17)(6)
(7)
(3)(12) (9)
(1)
(5)
(4)
(15)
(10) (8)
(2)
(11)
(7)
(12)
(17)(6)(9)
(3)
(16)