Filter
Top Products
110
Chapter 7
AV
Using the AV Source (Pioneer AV Equipment)
❒ If “Auto Connect” is set to “On”, cellular
phone that has already been registered is con-
nected automatically.
➲ “Setting the automatic connection” ➞
Page 114
Using a cellular phone to initiate a con-
nection
Putting the navigation system in Connection
open mode allows you to establish a Bluetooth
wireless connection from your cellular phone.
1 Touch “Phone Connect” in the Function
menu.
The phone connection menu screen appears.
2 Touch “Connection Open”.
“Pairing” is flash in the display.
3 Use a cellular phone to connect to the
navigation system.
Connection to the cellular phone starts. When
the connection is established, the device
name of the connected cellular phone is dis-
played.
❒ Operation varies depending on the type of
your cellular phone. Refer to the instruc-
tion manual that came with your cellular
phone for detailed instructions.
❒ To complete the connection, please check
the device name (Pioneer BT unit2) and
enter the PIN code (0000) on your cellular
phone.
➲ “Editing the PIN code” ➞ Page 129
Searching for available cellular phones
You can have the navigation system search for
any available phones in the area that have Blue-
tooth wireless technology, then select which one
you want to connect to from a list displayed
onscreen.
1 Touch “Phone Connect” in the Function
menu.
The phone connection menu screen appears.
2 Touch “Search”.
When available cellular phones featuring
Bluetooth wireless technology are found,
device names are displayed.
❒ While Searching, “Search” is flash in the
display.
❒ If the navigation system fails to find any
available cellular phones, Phone Not
Found is displayed.
❒ Touching “Phone Name” changes the list
between the device name and the BD
address.
3 Touch a device name you want to con-
nect.
Connection to the cellular phone starts. When
the connection is established, the device
name of the connected cellular phone is dis-
played.
❒ To complete the connection, you may need
to enter the PIN code (0000) on your cellu-
lar phone.
➲ “Editing the PIN code” ➞ Page 129
Connecting to a registered cellular
phone
Once your phone is registered with the navigation
system, it is a simple matter to establish a Blue-
tooth wireless connection when a registered
phone is within range.
1 Touch “Phone Connect” in the Function
menu.
The phone connection menu screen appears.
2 Touch “Direct Connect”.
The registered phone list is displayed.
3 Touch a device name you want to con-
nect.
Connection to the cellular phone starts. When
the connection is established, the device
name of the connected cellular phone is dis-
played.
BT-TEL