Filter
Top Products
131
Chapter 8 Customizing the AV Source SettingAV
— The “Video image” and sound are output
only when the appropriate setting on “AV1
Input” / “AV2 Input”.
Setup adjustments
(1) System menu display
➲ How to display the System menu ➞ Page 79
Setting the video input
You can switch the setting according to the con-
nected component.
❒ Select “Video” to watch video of a connected
component as AV-1 or AV-2 source.
1 Touch “AV1 Input” or “AV2 Input” in the
System menu.
Each touch of the “AV1 Input” or “AV2
Input” changes the settings as follows:
AV1 Input:
• Off — No video component is connected
• Video — External video component
• EXT — Pioneer external unit connected
with RCA video cable
• M-DVD — DVD player or Multi-DVD player
connected with IP-BUS cable.
❒ When a DVD player or Multi-DVD player is
connected with IP-BUS cable and RCA
video cable, select M-DVD. When the AV
source is M-DVD, the “Video image” of the
DVD player or Multi-DVD player can be dis-
played.
AV2 Input:
• Off — No video component is connected
• Video — External video component
❒ When a Pioneer external unit is connected
with an IP-BUS cable, select EXT. When
the audio source is EXT, the “Video
image” of the Pioneer external unit can be
displayed.
❒ Use AV2 Input when connecting CD-
RM10 (sold separately) through the exter-
nal video component.
Setting for rear view camera
The following two functions are available. The
rear view camera feature requires a separately
sold rear view camera (e.g. ND-BC2). (For details,
consult your dealer.)
Camera for backing up
The navigation system features a function that
automatically switches to the full-screen rear
camera image installed on your vehicle. When
the shift lever is in the REVERSE (R) position, the
screen automatically switches to full-screen rear
view camera.
Camera for Rear view mode
Rear View can be displayed at all times (e.g.
when monitoring an attached trailer, etc.) as a
split screen where map information is partially
displayed. Please be aware that in this setting,
camera image is not resized to fit, and that a por-
tion of what is seen by the camera is not view-
able.
• Pioneer recommends the use of a camera
which outputs mirror reversed images,
otherwise screen image may appear
reversed.
• Immediately confirm whether the display
changes to a rear view camera image when the
shift lever is moved to REVERSE (R) from
another position.
• When the whole screen changes to a rear view
camera image during normal driving, switch to
another setting.
❒ Initially, this function is set to Off.
1 Touch “Camera” in the System menu.
2 Touch “Camera” to turn rear view camera
setting on.
Touching “Camera” switches between “On”
and “Off”.
❒ Unless this setting is “On”, you cannot
switch to Rear View mode.
(1)
Other Functions