Pioneer AVIC-N4 Speaker System User Manual


 
123
Chapter 8 Customizing the AV Source SettingAV
Chapter 8
Customizing the AV Source Setting
Various settings are available with the audio
source according to your audiovisual requests.
This chapter describes the methods of changing
the various settings and how to set of the LCD
panel.
Audio Adjustments
Introduction to audio adjust-
ments
(1) Sound display
Shows the audio function names.
How to display the Sound menu Page 79
Only when the subwoofer controller setting is
Preout Full, Non Fading will be displayed
instead of Sub Woofer.
“Setting the rear output and subwoofer con-
troller” Page 129
When selecting the FM tuner as the source,
you cannot switch to “SLA”.
Using the equalizer
The equalizer lets you adjust the equalization to
match vehicle interior acoustic characteristics as
desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list of
the equalizer curves:
1 Touch “EQ Menu” in the Sound menu.
2 Select the desired equalizer curve.
Custom1 and Custom2 are adjusted
equalizer curves.
When Flat is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
Flat and a set equalizer curve.
(1)
Equalizer curve
S.Bass
S.Bass
is a curve in which only low-pitched sound is
boosted.
Powerful
Powerful is a curve in which low-pitched and high-
pitched sounds are boosted.
Natural
Natural is a curve in which low-pitched and high-
pitched sounds are slightly boosted.
Vocal
Vocal is a curve in which the midrange, which is the
human vocal range, is boosted.
Flat
Flat is a flat curve in which nothing is boosted.
Custom1
Custom1 is an adjusted equalizer curve that you cre-
ate.
Custom2
Custom2 is an adjusted equaliser curve that you cre-
ate.
Audio Adjustments