152
Appendix NAVI/AV
Problems in the AV screen (during iPod playback)
Messages and how to react to them
The following messages may be displayed by your navigation system.
❒ There are occasions when you may see error messages other than those shown here. In such a
case, follow the instructions given on the display.
Playback is not with the audio lan-
guage and subtitle language settings
selected in “DVD/DivX Setup”.
The DVD playing does not feature
dialog or subtitles in the language
selected in “DVD/DivX Setup”.
Switching to a selected language is
not possible if the language selected
in “DVD/DivX Setup” is not
recorded on the disc.
Switching the viewing angle is not
possible.
The DVD playing does not feature
scenes shot from multiple angles.
You cannot switch between multiple
angles if the DVD does not feature
scenes recorded from multiple
angles.
You are trying to switch to multiple
angle viewing of a scene that is not
recorded from multiple angles.
Switch between multiple angles
when watching scenes recorded
from multiple angles.
The picture is extremely unclear/dis-
torted and dark during playback.
The disc features a signal to prohibit
copying. (Some discs may have this.)
Since the navigation system is com-
patible with the copy guard analog
copy protect system, when playing a
disc that has a signal prohibiting
copying, the picture may suffer from
horizontal stripes or other imperfec-
tions when viewed on some displays.
This does not mean the navigation
system is malfunctioning.
Symptom Cause Action (See)
Cannot be operated. The iPod is frozen. • Reconnect the iPod with the inter-
face cable for iPod
®
(sold sepa-
rately).
•Update the iPod version.
The authorization error has occurred. • Reconnect the iPod with the inter-
face cable for iPod
®
(sold sepa-
rately).
• Set the ACC to Off and set it to On
again.
• Update the iPod version.
Message When What to do
Please insert the appropriate disc.
This is not the appropriate disc.
Please insert the appropriate disc.
If you try to use a disc which is
incompatible with this system.
Insert a suitable disc.
If you insert a disc upside down. Insert the disc with the label upward.
If the disc is dirty. Clean the disc.
If the disc is cracked or otherwise
damaged.
Insert a normal, round disc.
Irregular speed pulse signal is
detected. Please power off the sys-
tem and check the installation. After
you have checked, please re-boot the
system and press “OK”.
If the navigation system does not
receive the vehicle speed pulse.
Consult your Pioneer dealer.
Symptom Cause Action (See)