Filter
Top Products
3-23
Catalyst 2950 Desktop Switch Software Configuration Guide
78-14982-01
Chapter 3 Getting Started with CMS
Menus and Toolbar
Figure 3-12 Multilink Decomposer Window
Device Popup Menus
Specific devices in the Topology view display a specific popup menu:
• Cluster (see Table 3-16)
• Command switch (see Table 3-17)
• Member or standby command switch (see Table 3-18)
• Candidate switch with an IP address (see Table 3-19)
• Candidate switch without an IP address (see Table 3-20)
• Neighboring devices (see Table 3-21)
Note The Device Manager option in these popup menus is available in read-only mode on Catalyst 2900 XL
and Catalyst 3500 XL switches running Release 12.0(5)WC2 and later. It is also available on
Catalyst 2950 switches running Release 12.1(6)EA2 and later and on Catalyst 3550 switch running
Release 12.1(8)EA1 or later. It is not available on the Catalyst 1900 and Catalyst 2820 switches.
To display a device popup menu, click an icon, and right-click.
Table 3-16 Device Popup Menu of a Cluster Icon
Popup Menu Option Task
Expand cluster View a cluster-specific topology view.
Properties Display information about the device.