A-2
Catalyst 2950 Desktop Switch Software Configuration Guide
78-14982-01
Appendix A Supported MIBs
Using FTP to Access the MIB Files
• CISCO-TCP-MIB
• CISCO-VLAN-MEMBERSHIP-MIB
• CISCO-VTP-MIB
• ENTITY-MIB
• IANAifType-MIB
• IF-MIB (RFC 1573)
• OLD-CISCO-CHASSIS-MIB
• OLD-CISCO-CPU-MIB
• OLD-CISCO-INTERFACES-MIB
• OLD-CISCO-IP-MIB
• OLD-CISCO-MEMORY-MIB
• OLD-CISCO-SYSTEM-MIB
• OLD-CISCO-TCP-MIB
• OLD-CISCO-TS-MIB
• RFC1213-MIB
• RFC1398-MIB
• RMON-MIB (RFC 1757)
• RS-232-MIB
• SNMPv2-MIB
• SNMPv2-SMI
• SNMPv2-TC
• TCP-MIB
• UDP-MIB
Note The IF-MIB and the CISCO-IETF-VDSL-LINE-MIB are supported as read-only MIBs for the FE
interfaces for the CPE devices.
Using FTP to Access the MIB Files
Follow these steps to obtain each MIB file:
Step 1 Use FTP to access the server ftp.cisco.com.
Step 2 Log in with the username anonymous.
Step 3 Enter your e-mail username when prompted for the password.
Step 4 At the ftp> prompt, change directories to /pub/mibs/supportlists.