Filter
Top Products
Index
IN-18
Catalyst 2950 Desktop Switch Software Configuration Guide
78-14982-01
passwords
default configuration
7-2
disabling recovery of 7-5
encrypting 7-4
in clusters 6-16, 6-20
in CMS 3-30
overview 7-1
recovery of 28-6
setting
enable
7-3
enable secret 7-4
Telnet 7-6
with usernames 7-7
VTP domain 15-8
patch panel 1-16
path cost
MSTP
12-18
STP 11-16
PBX 1-16
PC (passive command switch) 6-12, 6-23
performing an LRE upgrade 10-15, 10-16
persistence, LRE link 10-14
per-VLAN Spanning Tree (PVST) 11-2
per-VLAN Spanning Tree+ (PVST+) 11-8
physical ports 9-1
PIM-DVMRP, as snooping method 17-6
plain old telephone service
See POTS splitters and POTS telephones
policers
configuring for each matched traffic class
26-21
described 26-3
number of 1-6, 26-7
types of 26-6
policing 1-6, 26-3
policy maps for QoS
characteristics of
26-21
configuring 26-21
described 26-6
displaying 26-28
POP 1-18
Port Aggregation Protocol
See EtherChannel
See PAgP
port-based authentication
authentication server
defined
8-2
RADIUS server 8-2
client, defined 8-2
configuration guidelines 8-7
configuring
manual re-authentication of a client
8-11
quiet period 8-11
RADIUS server 8-10
RADIUS server parameters on the switch 8-9
switch-to-client frame-retransmission number 8-13
switch-to-client retransmission time 8-12
default configuration 8-6
described 8-1
device roles 8-2
displaying statistics 8-14
EAPOL-start frame 8-3
EAP-request/identity frame 8-3
EAP-response/identity frame 8-3
enabling
802.1X authentication
8-8
periodic re-authentication 8-10
encapsulation 8-2
initiation and message exchange 8-3
method lists 8-8
ports
authorization state and dot1x port-control
command
8-4
authorized and unauthorized 8-4
resetting to default values 8-14
switch
as proxy
8-2
RADIUS client 8-2
topologies, supported 8-5