Filter
Top Products
CHAPTER
22-1
Catalyst 2950 Desktop Switch Software Configuration Guide
78-14982-01
22
Configuring RMON
This chapter describes how to configure Remote Network Monitoring (RMON) on your switch. RMON
is a standard monitoring specification that defines a set of statistics and functions that can be exchanged
between RMON-compliant console systems and network probes. RMON provides you with
comprehensive network-fault diagnosis, planning, and performance-tuning information.
Note For complete syntax and usage information for the commands used in this chapter, refer to the Cisco IOS
Configuration Fundamentals Command Reference for Release 12.1.
This chapter consists of these sections:
• Understanding RMON, page 22-1
• Configuring RMON, page 22-2
• Displaying RMON Status, page 22-6
Understanding RMON
RMON is an Internet Engineering Task Force (IETF) standard monitoring specification that allows
various network agents and console systems to exchange network monitoring data. You can use the
RMON feature with the Simple Network Management Protocol (SNMP) agent in the switch to monitor
all the traffic flowing among switches on all connected LAN segments.