Filter
Top Products
Procedure
Enter a short message for the transmitter.
Your message can be up to 32 characters long.
5.6.3 Configure Date
Display
Not available
ProLink II ProLink > Configuration > Device > Date
Field Communicator Configure > Manual Setup > Info Parameters > Transmitter Info > Date
Overview
Date lets you store a static date (not updated by the transmitter) in transmitter memory.
This parameter is not used in processing and is not required.
Procedure
Enter the date you want to use, in the form mm/dd/yyyy.
Tip
ProLink II and ProLink III provide a calendar tool to help you select the date.
5.6.4
Configure Sensor Serial Number
Display
Not available
ProLink II ProLink > Configuration > Sensor > Sensor S/N
Field Communicator Configure > Manual Setup > Info Parameters > Sensor Information > Transmitter Serial Number
Overview
Sensor Serial Number lets you store the serial number of the sensor component of your
flowmeter in transmitter memory. This parameter is not used in processing and is not
required.
Procedure
1. Obtain the sensor serial number from your sensor tag.
2. Enter the serial number in the Sensor Serial Number field.
Configure device options and preferences
80 Micro Motion
®
9739 MVD Transmitters