Filter
Top Products
5.6 Configure informational parameters
The informational parameters can be used to identify or describe your flowmeter but they
are not used in transmitter processing and are not required.
The informational parameters include:
• Device parameters
-
Descriptor
-
Message
-
Date
• Sensor parameters
-
Sensor Serial Number
-
Sensor Material
-
Sensor Liner Material
-
Sensor Flange Type
5.6.1 Configure Descriptor
Display
Not available
ProLink II ProLink > Configuration > Device > Descriptor
Field Communicator Configure > Manual Setup > Info Parameters > Transmitter Info > Descriptor
Overview
Descriptor lets you store a description in transmitter memory. The description is not used in
processing and is not required.
Procedure
Enter a description for the transmitter.
You can use up to 16 characters for the description.
5.6.2
Configure Message
Display
Not available
ProLink II ProLink > Configuration > Device > Message
Field Communicator Configure > Manual Setup > Info Parameters > Transmitter Info > Message
Overview
Message lets you store a short message in transmitter memory. This parameter is not used
in processing and is not required.
Configure device options and preferences
Configuration and Use Manual 79